Ammonium ion selective electrode has the advantages of simple measurement and accurate response. It can be used by PH meter, ion meter and online ammonia nitrogen analyzer. It is widely used in biological samples ammonia nitrogen, soil ammonia nitrogen, surface water ammonia nitrogen, sewage ammonia nitrogen, and the online determination of ammonia nitrogen in water.
CONTACT WECHAT:18156665555measuring principle
The selective electrode of online ammonium ion detector is an effective method to measure the ammonia nitrogen content in samples. Ammonium ion-selective electrodes are also often used in on-line instruments, such as the determination of ammonia nitrogen content in water.
Ammonium ion selective electrode has the advantages of simple measurement and accurate response. It can be used by PH meter, ion meter and online ammonia nitrogen analyzer. It is widely used in biological samples ammonia nitrogen, soil ammonia nitrogen, surface water ammonia nitrogen, sewage ammonia nitrogen, and the online determination of ammonia nitrogen in water.
Application:
ammonium ion measurement of boiler feed water; ammonium ion measurement of surface water, ammonium ion measurement of fertilizer.
Sensing technical parameter
| gradient | 55± 3mv |
| repetitiveness | ± 2% |
| disturb | potassium ion |
| temperature range | 0-50°C |
| pressure limit | 0-2 atm |
| response speed | In 30 seconds to reach a 95% response |
| lay in | Long-term: dry preservation; |
| Short-term: stored in a diluted ammonium standard solution; | |
| measuring range | 0.1ppm –18000ppm ; |
| PH range | 4-10PH |
| output impedence | 20-50MΩ |
| Maintenance and cleaning | Use a diluted ammonia standard solution and adjust the PH to greater than 11 |
| temperature compensation | 10k/22k//2.252K/PT1000/PT100 Optional |
| on line operation | can |
| isopotential point | 10 ppm NH4 + |
| reference electrode | Double salt bridge, single hole ceramic liquid boundary |
| material quality | PMMA+PVC |
| connect | terminal |
| apply | Boiler water, surface water, and fertilizer. |
Controller parameters
| Model | MDS-KP500 |
| Display | 4.3 inches, 480*800 resolution, 262K color, IPS screen, wide viewing Angle, with backlight |
| Capacitive touch screen with three protection processes (moisture-proof, mildew proof, salt spray proof) | |
| Display size | 95.0mm*53.9mm |
| Measuring range | -99999.0000~99999.0000 |
| Password Protection | The default password is 0000 |
| Compatible sensor | Digital sensor |
| Mounting method | Disk mounting (with chassis), wall-mounted mounting |
| Alarm relay | 2 relays can set high and low alarm |
| Current output | 2 isolated 4-20mA, maximum load 750Q, can be set |
| Communication port | RS485 Modbus RTU |
| Memory backup | All user Settings are stored indefinitely in EERPOM |
| historical data | The storage capacity of 8000 points is recorded at a 5-minute interval |
| Operating environment | -10~+50℃,0~95% relative humidity, no condensation |
| Storage environment | -20 to +70 ° C,0 to 95% relative humidity, non-condensing |
| The power supply | 12V±10% |
| Power consumption of the instrument | less than 6W |
| Instrument size | 144X145X85(mm) |
| Protection class | IP65 |
